Janome Hello Kitty 18750, Инструкция по эксплуатации, Страница: 48 / 100

42
Zipper Sewing
Machine setting
q
Stitch pattern: 00
w
Needle thread tension: 1 to 4
e
Presser foot: Zipper foot: E
• To snap on the zipper foot
q
Slit
w
Pin
e
To sew left side
r
To sew right side
Fit the pin on the zipper foot into the slit on the foot
holder.
* To sew the left side of the zipper, attach zipper foot on
the right-hand side of pin.
* To sew the right side of zipper, attach the zipper foot on
the left-hand side of pin.
q
w
e r
q e w
1
1
9
0
5
3
4
2
3
4
5
(7/8˝)
(2.2cm)
3
1
2
1/8˝
(0.4 cm)
• Fabric preparation
q
Right (top) side of fabric
w
Wrong (bottom) side of fabric
e
Bottom seam
r
Zipper bottom stop position
t
Basting stitch
Place the right (top) sides of the fabric
q
together. Sew a
bottom seam
e
7/8˝ (2.2 cm) from the right edge to the
estimated zipper bottom stop position
r
. Sew in reverse
a few stitches to lock.
Increase the stitch length to 4, set needle thread tension
to 0, and sew basting stitch
t
the entire length of the
zipper sewing.
1
• To sew
q
1/8˝ (0.4cm) fabric margin
w
Zipper teeth
e
Zipper tape
z
Attach zipper foot on right-side of pin.
Fold back the upper layer seam allowance. Fold back
the lower layer seam allowance to leave a 1/8" (0.4 cm)
margin of fabric
q
.
Place zipper teeth next to margin edge and pin margin to
zipper tape.
Align zipper foot with margin edge. Return thread tension
and stitch length to original settings. Sew a seam the
entire length of zipper tape, removing pins as you go.
Before reaching pull-tab, stop the machine with needle in
the fabric and raise the foot, then unzip a few inches to
clear a path for the stitch.
Remove fabric and close zipper.