janitza UMG 604 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 78

background image

58

Service and maintenance

Service and maintenance

The device is subjected to various safety
checks before delivery and marked with a
seal. If a device is opened, the safety checks
must be repeated. A warranty will be provided
for unopened devices only.

Repair and calibration

Repair work and calibration can be carried out
by the manufacturer only.

Front film

The front film can be cleaned with a soft cloth
and standard household cleaning agent. Do
not use acids and products containing acid
for cleaning.

Battery

The  internal  clock  is  provided  with  power
from  the  power  supply  voltage.  If  the  power
supply  voltage  fails  the  clock  is  supplied  by
the battery. The clock supplies date and time
information, e.g. for recordings, minimum and
maximum values and events.
The  life  expectancy  of  the  battery  is  at  least
5  years,  at  a  storage  temperature  of  +45°C.
The typical life expectancy of the battery is 8
to 10 years.
The  device  must  be  opened  to  change  the
battery.  If  the  device  has  been  opened  a
renewed  safety  check  is  necessary  for  safe

operation. A warranty will be provided for
unopened devices only.

Disposal

The UMG604 can be reused or recycled as
electronic scrap in accordance with the legal
provisions. The permanently installed lithium
battery must be disposed of separately.

Firmware update

If a firmware update has to be performed for
your UMG604 you can do this with the GridVis
software included in the scope of supply.

Service

Should  questions  arise,  which  are  not
described  in  this  manual,  please  contact  the
manufacturer directly.
We  will  need  the  following  information  from
you to answer any questions:
- Device name (see rating plate),
- Serial name (see rating plate),
-  Software  release  (see  measured  value
display),
- Measuring-circuit voltage and power supply
voltage,
- Precise description of the error.

«
...
56
57
58
59
60
...
»

Содержание UMG 604















































































Отзывы:

Нет отзывов

Похожие инструкции для UMG 604

DigitalFlow XMT868i

Бренд: Panametrics Страницы: 74

Бренд: Datavideo Страницы: 26

Бренд: Datcon Страницы: 84

Бренд: Oldham Страницы: 22

Бренд: UEi Страницы: 8

Бренд: Artesia Страницы: 36

Бренд: Schneeberger Страницы: 35

International 2S Pro

Бренд: Brantz Страницы: 2

Бренд: Salutron Страницы: 2

Бренд: SBS Страницы: 17

Бренд: Kawai Страницы: 2

Бренд: Percussion Play Страницы: 3

Бренд: AlazarTech Страницы: 60

Бренд: Kobold Страницы: 12

Бренд: Banner Страницы: 6

Blancett B220-880

Бренд: Badger Meter Страницы: 16

Бренд: Extech Instruments Страницы: 8

Бренд: Reed Instruments Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды