janitza UMG 604, Установка и ввод в эксплуатацию, Страница: 53 / 78

53
PC UMG604
PC
UMG604
m
Configuration
DHCP
Server
Switch
Fig. Connection example, the UMG604 and
PC require a fixed IP address.
Fig. Connection example, the UMG604 and
PC are automatically assigned an IP address
by a DHCP server.
Patch cables
Patch cables
The UMG604 may only be connected
to the ethernet following consultation
with the network administrator!
Ethernet (optional)
Fixed IP address
In simple networks without DHCP servers the
network address must be set directly at the
device.
BootP
BootP allows fully automatic integration of a
UMG604 in an existing network. BootP is an
older protocol and does not have the functional
scope of DHCP.
DHCP mode
DHCP enables fully automatic integration of a
UMG604 in an existing network without any
further configuration. On starting the UMG604
automatically imports the IP address, the net
mask and the gateway from the DHCP server.
The UMG604 is set in the factory to “DHCP”.
Switch