Jandy JRT Series, Инструкция по установке и эксплуатации

Страница: 21 / 96

Page 19 ENGLISH
Jandy ® JRT Series Heat Pumps
|
Installation and Operation Manual
Spa Mode - (Optional Maintain Heat)
If connected to an AquaLink, the Maintain Heat mode
allows the heat pump to monitor the temperature of the
water 24 hours a day by turning the spa pump on and
sampling the water temperature.
NOTE
This feature only works when connected to
an AquaLink
.
To operate in spa mode with the Maintain Heat feature,
press
SPA
, then press
MENU ,
press the
Down
button
until
MAINTAIN SPA HEAT
is displayed, press the
MENU
button . The associated left green LED indicator
will light and the unit will display
SET:XXX° .
Change
the temperature set point by pressing the
Up
or
Down
button until the desired set point is displayed. After
5 seconds of inactivity, the new set point is stored in
memory.
5.3 Chiller Operating Feature
Pool Mode - (Normal Chill)
To enable the pool mode, press POOL
. The associated
left green LED indicator will light and the unit will
display
SET:XXX°
.
NOTE
XXX
represents the current temperature setting
on the control. The default setting for pool
temperature is 80°F (26°C).
Press the
MENU
button. P
ress the Up or Down
button
until you reach
POOL CHILL
, press the
MENU
button.
You can change the temperature set point by pressing
the Up or Down button . Repeatedly press the Up or
Down button until you reach the desired temperature
set point. After 5 seconds of inactivity, the new set point
is stored in memory. When the water temperature rises
to 1 degree above the temperature setting
and
after a 5
minute delay, the control will start the heat pump and
the associated right LED will light GREEN
.
Pool Mode - (Optional Maintain Chill)
If connected to an AquaLink, the Maintain Chill option
mode allows the unit to monitor the temperature of the
water 24 hours a day by turning the pool pump on and
sampling the water temperature.
NOTE
This feature only works when connected to
an AquaLink
.
When the temperature of the water rises above the
desired temperature setting, the control will then turn on
the unit and the associated right green LED will light.
To operate in pool mode with the Maintain Chill feature,
press POOL , then press MENU , then press the Down
button until MAINTAIN POOL CHILL is displayed,
press the
MENU
button. The associated left green LED
indicator will light and the unit will display
SET:XXX°
.
Change the temperature set point by pressing the
Up
or
Down
button until the desired set point is displayed.
After 5 seconds of inactivity, the new set point is stored
in memory.
Spa Mode - (Optional Maintain Chill)
If connected to an AquaLink, the Maintain Chill mode
allows the heat pump to monitor the temperature of the
water 24 hours a day by turning the spa pump on and
sampling the water temperature.
NOTE
This feature only works when connected to
an AquaLink
.
When the water temperature rises above the
programmed temperature set point, the control will start
the heat pump.
To operate in the spa mode with the Maintain Chill
feature, press
SPA
, then press
MENU
, press the
Down
button until
MAINTAIN SPA CHILL
is displayed,
press the
MENU
button. The associated left green LED
indicator will light and the unit will display
SET:XXX°
.
Change the temperature set point by pressing the
Up
or
Down
button until the desired set point is reached.
After 5 seconds of inactivity, the new set point is stored
in memory.
5.4 User Setup Options
The User Setup options allow the user to select specific
Languages, Temperature Scale, Spa Timer, and Display
Light options.
Language Setup
1. Make sure the control is in the
OFF
mode.
2. To enter the User Setup mode, press and hold the
MENU button for 5 seconds.
NOTE The display will revert back to OFF after one
minute since the last key press.
3. To select a language, use the
Up
or
Down
button
to display
SELECT USER SETUP LANGUAGE
.
Press the MENU button. The
SELECT
LANGUAGE ENGLISH
(default language)
appears, use the Up or Down button to scroll
through the language options. When you reach the
desired language, press the MENU button to select
the language. Press POOL or SPA to exit the
User Setup mode.