manualshive.com logo in svg

Jandy Aqualink RS OneTouch, Руководство пользователя, Страница: 69 / 88

Поделиться
Скачать
Jandy Aqualink RS OneTouch Скачать руководство пользователя страница 69

Page 20

4.26  Solar Priority/Heat Pump Menu

When solar and heater are enabled the solar will heat the water until either the thermostat setting has been reached 
or solar heat is no longer available. If there is not enough solar heat available to reach the thermostat setting, solar 
heat will shut off and the other heat source (usually gas heater) will take over to bring the water up to the thermostat 
setting.

4.26.1  To operate the Solar Priority/Heat Pump

Under SYSTEM SETUP, use the FORWARD or BACK arrow to move to SOLR PRIORITY, press ENTER. Use the 
FORWARD or BACK arrow button to turn solar priority on or off. Press ENTER to return to the information screen.

4.25  In Floor/Return Valve Switch ing Menu

When the AquaLink

®

 RS is set up to control this feature, the "Solar JVA" circuit will be activated every 20 minutes 

to switch a three port valve from returning water through normal return lines to send the water to an in floor cleaning 
system. If a solar system is installed this circuit reverts to AUX 3. A JVA/AUX PC Board is required.

4.25.1  To operate In Floor/Return Valve Switch ing 

Under SYSTEM SETUP, use the FORWARD or BACK arrow to move to IN FLOOR CLN. Use the FORWARD or 
BACK arrow button to turn IN FLOOR CLN on or off. Press EN TER to return to the information screen.

4.24  Set Dimmer Menu

The SET DIMMER menu is used to assign auxiliary buttons to control a dimmable light. Please note that your 
installer must install a Light Dimming Relay in order for your light(s) to be dimmable. 

NOTE  An optional Light Dimming Relay must be installed and only 110 VAC lighting can be dimmed.

4.24.1  To operate dimmable lights

1. 

Press the MENU button, then press the FORWARD button and scroll through until you reach SYSTEM 
SETUP. Press ENTER then press FORWARD to SET DIMMERS <—>*. The AquaLink

®

 RS display will 

read SELECT AN AUX TO OPERATE AS A DIMMER. 

2. 

Press the AUX button you want to operate as a dimmable light and press ENTER.

3. 

Dimmers can be set at 25%, 50%, 75%, or 100%, depending upon the amount of light desired, by pressing 
the AUX assigned as a dimmer and using arrow (<—>*) buttons to dim or brighten. Once desired brightness 
is achieved, press ENTER. Press AUX to turn off. NOTE: When light is turned back on, it will automatically 
return to the brightness last set.

Содержание Aqualink RS OneTouch

























































































Отзывы:

Нет отзывов