J&M 6018, Руководство оператора

Страница: 29 / 41

29
Changing from 60’ to 40’ Wing Span
Changing from 60’ to 40’
• Unfold your applicator as normal. Rotate the wings
forward and engage the latches.
• Unfold the outer wings and stub wings enough to
place the cylinder stops on the wings.
• Fold the stub wings and outer wing back in.
• On both 4”x24” cylinders close the valve. This will
prevent the cylinder from extending while the stub
wings are being folded.
Note: the cylinder stop allows a gap on the wings
so that during use the wings can flex with the
contour of the ground.
Changing from 40’ to 60’
• Open the shut-off valve on the 4”x24” cylinders. This will allow the applicator to extend to the full 60 feet.
• Remove the cylinder stop so that it will properly fold when finished.
Scan to watch
the video