J&M 6018, Руководство оператора

Страница: 11 / 41

11
Pre-Operation Checklist
Defects & Scratches
Examine paint and poly tank for scratches, cracks, gouges, and defects.
Filling the Tank
Warning: Ensure the applicator is pinned to the tractor before filling tank. The applicator must be pinned to a tractor when any
fluid is present in the tank.
Make sure the area is clear of bystanders when filling the tank. Always wear protective clothing, gloves, and masks when handling
fertilizer/chemicals. Follow the fertilizer/chemical manufacturer’s instructions when filling the tank. Keep the tank lid on at all times to
keep out debris.
Fertilizer Pump
Raise the toolbar with wings unfolded and turn on the fertilizer pump. Check if liquid is coming out of each knife/injector. Clean or
replace knives/injectors if necessary.
Unfolding the Wings
It is recommended to unfold the side wings in the field. Keep all bystanders away while unfolding the wings. See “Folding & Unfolding”
on page 17.
Safety Decals & Lights
Check that safety decals, reflective decals, and lights are properly located. Refer to “Decals” page of the Parts Manual for proper
placement. Ensure all lights function properly.
SMV
Position the SMV emblem with one point of the triangle upward and as near to the rear and centered or as near to the left of center of
the unit as practicable. Secure the SMV emblem two to ten feet above the ground measured from the lower edge of the emblem. Before
transporting, ensure that SMV emblem is clean and visible.