J&E Hall JCC2, Техническое руководство

Страница: 23 / 26

Issue: 01.02.2016 Page 23
Technical Information
Fan speed controller
As detailed on page 4 of this manual, for applications where the system pipe run is longer than 15m, the fitting of a fan speed controller
is compulsory.
The suggested fan speed controller is an Aspen Cooling Only model which can be obtained either from your unit distributor or various
refrigeration stockists.
The fan speed controller comes supplied with full fitting and set-up instructions. However, brief connection instructions are as follows:
Fan Speed Controller Outdoor Unit

Find a suitable mounting point for the controller within the outdoor unit casing and fix securely.

Mount the temperature sensor securely on the condenser coil and connect the red/blue wires to the controller.

Remove the condenser fan Live/Neutral wires (Black/Blue) from the COMP and N connections on the outdoor unit and connect
these two wires to ML (Live) and MN (Neutral) on the controller.

Make up a new wire to connect COMP (on unit) to L (on controller) and another new wire to connect N (on unit) to N (on
controller). Provide a new Earth wire between the unit and E on the controller.

Tighten all wiring connections and secure all wires as necessary. The wiring is now complete.

Run the unit and adjust controller as per instructions to give required condensing temperature (35°C~40°C)