XG100WM User Manual
10-4
Janam Technologies LLC
Battery Warning
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
Use only Janam approved batteries such as the BAT-G1-001 and recharge batteries using only Janam
approved chargers. Use only easily accessible wall outlets that are easily reached with the length of the
supplied power cables.
The standard charger provides an easy and convenient way to charge the device. You can purchase the
charger through an authorized dealer. Visit Janam’s website www.janam.com for information.
The power outlet shall be installed near the equipment and shall be easily accessible.
GENERAL INFORMATION
1. Before using the standard charger, read all instructions and warnings.
2. Please retain this instruction for future reference.
WARNING
1. No user serviceable parts inside. Do not open the charger. The charger is not serviceable.
2. If found any damage or cracking on the enclosure of the charger, do not use the charger. This charger
shall be disposed of.
3. Do not short-circuit the output terminals of the charger.
4. The charger is for indoor use only. Do not expose the charger to moisture or place the charger at location
which could subject to water spillage.
5. The standard charger is designed for use with this mobile computer only. Do not use this charger for
other purposes.
OPERATING INSTRUCTION
1. Insert the output plug of the standard charger to the barcode scanner before plug in the charger into ac
power socket outlet.
2. Always unplug the standard charger from the socket outlet after use.
3. Ensure that your local power supply system complies with the technical data of the standard
charger.
