Jamar TRAX Apollyon Plus II, Руководство пользователя

Страница: 33 / 88

2-9
study is in progress, of course). This is the setting we recommend as
it prevents the battery from draining if the unit is accidentally left on.
The Start option tells the Apollyon Plus II to start a new study if it
has been left on and undisturbed for more than 10 minutes and no
study is already in progress.
The Stay On option tells the Apollyon Plus II to leave itself on even
if it has been left on and undisturbed for more than 10 minutes and
no study is already in progress.
To change the setting, press TAB until Idle: is flashing, then press
DO to select either Shut Off, Start or Stay On.
Tests
This option allows you to
perform diagnostic tests on
various features of the TRAX
Apollyon Plus II to be sure
they are operating correctly.
Memory Test
The Memory test will check all memory locations in the unit’s 8
MB memory. To perform the test, press DO while Memory is flash-
ing and the TRAX Apollyon Plus II automatically starts testing the
memory. Note that the memory must be cleared of any count data
before the test can be performed.
Display Test
The Display test allows you to view all segments of the liquid
crystal display to be sure the display has not been damaged. To
test the display, press DO after each of the screens that are shown.
Keypad Test
The Keypad test allows you to check the functionality of each of
the buttons on the keyboard. When in this test mode a simulation of
the 12 keys is shown on the left side of the display. As you press a
key an ‘X’ should briefly appear at the correct location in the simu-
lation. Pressing the DO key will exit you from the test.
Memory Test
Display Test
Keypad Test
Tube Test EXIT
Main Menu > Utils > Tests
Chapter 2 — Operational Features of the TRAX Apollyon Plus II
Tests Screen