Jamar Black Cat II Plus, Руководство пользователя

Страница: 14 / 44

Black Cat II Plus Radar Recorder User’s Manual
2-2
Installation
Before going to the site to install the Black Cat II Plus Radar Recorder,
check that you have the following items from the installation kit:
You will also need a standard flat-head screwdriver or 5/16 inch nut driver
(not included with kit) to tighten the mounting clamp.
Check that your laptop is fully charged, has the latest version of the
STARnext software installed, and that the date and time on the laptop are
correct. You will synchronize the Black Cat II Plus Radar Recorder's time
and date to that of the laptop during setup.
Selecting a Site
When choosing a location to install the Black Cat II Plus Radar Recorder,
keep in mind that it will need to be mounted to a pole (typically a utility
pole) or tree, so the site will need to have one of these available for use.
Use of the optional square pole mounting bracket allows for installation on
street signs like speed limit signs, yellow cautionary signs, etc.
For the best results, the Black Cat II Plus Radar Recorder should be installed:
• Six to ten feet back from the road.
• At least six feet above the ground.
• At a 45 degree angle to the flow of traffic.
• Where the far side lane is no greater than 50 feet away.
• Where traffic is free flowing.
The unit should not be installed:
• At an intersection.
• Near where vehicles are likely to park.
• In a position that causes the radar head to be at an extreme angle.
• Near where pedestrians are likely to be crossing.
• Where the Radar's "view" is obstructed.
Chain Pole mounting bracket Locks with keys
Clamp Bands