Jamar Black Cat II Plus, Руководство пользователя

Страница: 31 / 44

3-13
Chapter 3 — Programming the Radar Head
LiveView
After settings have been uploaded into the Black Cat, the Liveview section
of the setup screen allows you to view and verify the accuracy of the data
you are currently collecting, compared to what you are actually seeing on
the road.
As a vehicle passes the detection zone you will see the details of that ve-
hicle appear.
IMPORTANT: The area of the
Black Cat II Plus Radar Record-
er that you are aiming toward
the road is the bulls eye target,
as shown in the picture here.
If you are not seeing vehicles in
Liveview, make sure the Radar
is properly aimed toward traffic.
We highly recommend that you use the LiveView to verify that the
Radar is correctly recording vehicles before you leave the site. If the
LiveView is not showing vehicles as they pass, the recorder is not getting
good data. Double check all setup settings.
Troubleshooting
If vehicles are not showing up in LiveView, first try disconnecting and
reconnecting to your radar. This can sometimes refresh LiveView with
the new settings and display the data correctly.
Note that if the vehicle information appears with a red box around it, this
indicates that the vehicle is traveling in the opposite direction of what the
radar is expecting, based on the direction of the lane it is detected in.