Jamar Black Cat II Plus, Руководство пользователя

Страница: 9 / 44

1-3
Display LEDs
ON/Alarm Indicator – This light illuminates a solid blue color during
boot-up. It also illuminates when a fault is detected. Wait for this light to
go off before attempting to connect to the STARnext Software. While the
LEDs are in sleep mode, this light will flash a blue light every three seconds.
Modem Indicator - This light will be solid green if there is no current
connection and the modem is available. It will turn solid blue when a valid
modem connection is made. The light will be off if the unit is not equipped
with a modem.
Bluetooth Indicator – This light will be solid green if there is no current
connection and the port is available. It will turn solid blue when a valid
Bluetooth connection is made.
USB Indicator – This light will be solid green if there is no current con-
nection and the port is available. It will turn solid blue when a valid USB
connection is made using a USB Micro B cable. It will turn solid red if an
invalid connection is made.
Detect Indicator – This is normally on solid blue, and flashes off when a
vehicle is detected.
Battery Indicator – This light flashes green when a 12V battery with an
adequate charge is connected. The light will be off if the unit is off or being
powered through the PoE port.
*The Display LEDs may time out after approximately 1 minute. Simply
push the Wake button to again see the indicators.
Wake (Power On) Button
This button is multi-functional. Pressing the button will activate the indi-
cators for a period of approximately 1 minute. If the button is pressed and
held for approximately 10 seconds, it will shut down the Black Cat II Plus
Radar Recorder. Pressing it again will restart it.
Chapter 1 — Introduction