Xonic 5L
6/23
(1)
CN402_Sensor_Up Connector
- Up sensor Pulse, Wave signal in/output terminal (Pulse : Output / Wave : Input)
- CONNECTOR spec : Hirose Electric - U.FL-R-SMT(10)
- 1Pin : 500Khz SIGNAL / 2Pin :GND
(3)CN403_Sensor_Down Connector
- Down sensor Pulse, Wave signal in/output terminal (Pulse : Output / Wave : Input)
- CONNECTOR spec : Hirose Electric - U.FL-R-SMT(10)
- 1Pin : 500Khz SIGNAL / 2Pin :GND
(4)CN501_Power Connector
- Use DC 3.6V
- CONNECTOR spec : MOLEX - 5267-2A
- 1Pin : VCC_3.6V / 2Pin :GND
(5)CN502_Firmware Write Connector
- CONNECTOR spec : Yeonho Electronics - 12505WS-10P
- 1Pin : JTAG_TOD / 2Pin :JTAG_TOI / 3Pin : JTAG_TMS / 4Pin : JTAG_TCK / 5Pin :
RESET 6Pin : NC / 7Pin : 3.6V / 8Pin : 3.6V / 9Pin : GND / 10Pin : GND
(6)CN503_External battery input connector
- Use external battery DC 3.6V
- CONNECTOR spec : Yeonho Electronics - 12505WS-4P
- 1Pin : RS232_TX / 2Pin :RS232_RX / 3Pin :GND / 4Pin : External battery_VALID
(7)CN505_RS232C Communication connector
- Flow calibration and adjustment
- CONNECTOR spec : Yeonho Electronics - 12505WS-5P
- 1Pin : RS232_TX / 2Pin :RS232_RX / 3Pin :GND / 4Pin : GND / 5PIN : NC
(8)SW101, SW102_Lead Switch
- Operates with neodymium magnet
- Lead Switch spec : RPS10
