Xonic 5L
12/23
-
Install USB TO RS232 Serial Converter operation software on a PC.
-
Check
“
USB Serial Converter
”
in Control Panel -> Device Manager -> Universal serial bus
controller.
-
Check
“
USB Serial Port(COM**)
”
Control Panel -> Device Manager -> Port(COM &LPT)
.
-
If there is no
“
USB Serial Converter
”
in Control Panel -> Device Manager -> Universal serial
bus controller, check if the USB TO RS232 Serial Converter is connected to the PC USB
terminal.
-
If there is no
“
USB Serial Converter
”
in Control Panel -> Device Manager -> Universal serial
bus controller, reinstall the USB TO RS232 Serial Converter operation software on the PC.
(2) PC Hyper Terminal serial communication setting.
- Port : Set by checking USB Serial Port
(COM number)
in Port(COM & LPT) of the PC device
manager.
- Baud rate : Set as 115200.
- Data bits : Set as 8.
- Parity : Set as None.
- Stop bits : Set as 1.
