Jain Technology Xonic 100 Series, Инструкция по эксплуатации

Страница: 39 / 47

Xonic
®
100 Series
Jain Technology
www.jain.co.kr Tel. 82-2-856-4114 Fax. 82-2-856-9503
39
8.2.5 Data Log –
Memory –
Log Enable
User must enable the function for data logger.
8.3.6 Data Log –
Memory –
Port Select
User can use both RS-232 port or Firmware port to connect flowmter with user’s
laptops.
Caution) The setting must be correct otherwise use is unable to download
the data.
8.3.7 Data Log –
Memory –
Memory Clear
User can clear all of memory here.
Wave Data
8.4 Data Log –
Wave Data
Download the Signal Wave Data.
MEMORY
1 . LOG OUTPUT
2 . FORMAT
3 . LOG INTERVAL
4 . LOG TIME SYNC.
5 . LOG ENABLE
6 . PORT SELECT
7 . MEMORY CLEAR LOG ENABLE
1 . DISABLE
2 . ENABLE
MEMORY
1 . LOG OUTPUT
2 . FORMAT
3 . LOG INTERVAL
4 . LOG TIME SYNC.
5 . LOG ENABLE
6 . PORT SELECT
7 . MEMORY CLEAR PORT SELECT
1 . RS232 PORT
2 . FIRMWARE PORT
MEMORY
1 . LOG OUTPUT
2 . FORMAT
3 . LOG INTERVAL
4 . LOG TIME SYNC.
5 . LOG ENABLE
6 . PORT SELECT
7 . MEMORY CLEAR MEMORY CLEAR
1 . CANCEL
2 . CLEAR
1 . TIME SET
2 . RS-232C
3 . MEMORY
4 . WAVE DATA
DATALOG
1 . STOP
2 . START
WAVE DATA
Press [ MENU ] – 8.DATA LOG – 3.MEMORY
–
8. PORT SELECT
Press [ MENU ] – 8.DATA LOG – 3.MEMORY
–
9. MEMORY CLEAR
Press [ MENU ] – 8.DATA LOG – 4.WAVE DATA
Press [ MENU ] – 8.DATA LOG – 3.MEMORY –
7.LOG ENABLE