Jain Technology Xonic 100 Series, Инструкция по эксплуатации

Страница: 38 / 47

Xonic
®
100 Series
Jain Technology
www.jain.co.kr Tel. 82-2-856-4114 Fax. 82-2-856-9503
38
RS-232C –
Comm Mode
8.2.9 Data Log –
RS-232C –
Select Comm
User can use both cable RS-232 and RS-485 to for the communication.
Memory of Data Logger
8.3.1 Data Log –
Memory –
Log Output
User can see the records of First Log and Last Log here.
8.3.2 Data Log –
Memory –
Format
User can add and list the data here so th data will be download sequentially
.
8.3.3 Data Log –
Memory –
Log Interval
The Log Interval is the measurement period of time which are taken by the
transducers.
Caution)If the flow value changes rapidly, then the log interval
time needs to be rapidly as well.
8.2.4 Data Log–
Memory–
Log Time Sync
RS-232C
1 . CONFIGURE
2 . HEADER
3 . FORMAT
4 . SEPERATOR
5 . LOG INTERVAL
6 . LOG TIME SYNC.
7 . LOG ENABLE
8 . COMM MODE
9 . SELECT COMM
1 . NORMAL
2 . CALL ANSWER
3 . CDMA COMM
4 . MODBUS-RTU
COMM MODE
RS-232C
1 . CONFIGURE
2 . HEADER
3 . FORMAT
4 . SEPERATOR
5 . LOG INTERVAL
6 . LOG TIME SYNC.
7 . LOG ENABLE
8 . COMM MODE
9 . SELECT COMM
1 . RS232
2 . RS485
SELECT COMM
1 . LOG OUTPUT
2 . FORMAT
3 . LOG INTERVAL
4 . LOG TIME SYNC.
5 . LOG ENABLE
6 . PORT SELECT
7 . MEMORY CLEAR
MEMORY LOG OUTPUT
1 . LOG DATE
2 . LOG OUTPUT
MEMORY
1 . LOG OUTPUT
2 . FORMAT
3 . LOG INTERVAL
4 . LOG TIME SYNC.
5 . LOG ENABLE
6 . PORT SELECT
7 . MEMORY CLEAR
FORMAT
SCFTIVE
F: Flow
T: Total
S: Site Name
C: Channel No
I:
Analog Input
V: Velocity
E:
Error
MEMORY
1 . LOG OUTPUT
2 . FORMAT
3 . LOG INTERVAL
4 . LOG TIME SYNC.
5 . LOG ENABLE
6 . PORT SELECT
7 . MEMORY CLEAR LOG INTERVAL
1 . 1 Sec
2 . 5 Sec
3 . 30 Sec
4 . 1 Min
5 . 5 Min
6 . 15 Min
7 . 30 Min
8 . 1 Hour
9 . 12 Hour
0 . 24 Hour
Press [ MENU ] – 8.DATA LOG – 2.RS-232C –
8. COMM MODE
▪
Normal – Default
▪
Call Answer – Only available in local
▪
CDMA Comm – CDMA Communication
▪
MODBUS RTU – MODBUS Communication
Press [ MENU ] – 8.DATA LOG – 2.RS-232C
–
9.SELECT COMM
Press [ MENU ] – 8.DATA LOG – 3.MEMORY –
1.LOG OUTPUT
Press [ MENU ] – 8.DATA LOG – 3.MOMERY- 2.FORMAT
➢
Move cursor by [

] [

].
➢
Input alphabet characters by [ F1 ].
➢
Delete characters by [ CLR ].
➢
Leave the edit mode by pressing [ ENT ].
Press [ MENU ] – 8.DATA LOG – 3.MEMORY
–
5.LOG INTERVAL
Press [ MENU ] – 8.DATA LOG – 2.MEMORY – 6.LOG TIME SYNC