JAI TM-9730CL, Руководство пользователя

Страница: 46 / 54

TM/TMC/RM/RMC-9730CL
38 Customer & Serial Commands
Table 7 Serial Commands Table
First
Character
Second
Character Third
Character
Response
Functions
1 “S” (Shutter) “M” (Manual) “0” – “9” Mode ACK Manual Shutter Mode
“X” “000” – “419” ACK Direct Shutter Mode
2 “G” (Gain) “M” “00” – “FF” ACK Gain Control
3 “V” (A/D Vref) “T” (Top) “00” – “FF” ACK Vtop reference setting
“B” (Bottom) “00” – “FF” ACK Vbtm reference setting
4 “W” (Write) “P” (Page) “0” – “6” ACK Write current setting to Page EEPROM
“U” (User) “A” – “D” ACK Write current setting to User EEPROM
“S” (System) “A” – “D” ACK Write current setting to System
EEPROM
5 “L” “P” (Page) “0” – “6” ACK Restore setting from Page EEPROM
“U” (User) “A” – “D” ACK Restore setting from User EEPROM
“S” (System) “A” – “D” ACK Restore setting from System EEPROM
“N” (kNee) “0” – “9” ACK Load Preset Knee Table
6 “R” (Report) “P” (Page) “0” – “6” ACK ACK + “P” + (“9” – “F”) + 16 bytes
“U” (User) “A” – “D” ACK ACK + “U” + (“A” – “D”) + 6 bytes
“S” (System) “A” – “D” ACK ACK + “S” + (“A” – “D”) + (6 bytes)
“R” (Current) ACK ACK + “RR” + 16 bytes
“X” (Execute) ACK Set Camera with loaded data
“D” (Date) Info Report CPU program version
7 “T” (Table) “N” (kNee) X1 + Y1 + X2 +
Y2 ACK (X1, Y1) coordinate for knee 1
X1, Y1, X2, Y2: “00 – FF”
(X2, Y2) coordinate for knee 2
“M” (Gamma) ACK
“L” (Linear) ACK
“C” (Switch A,
B Table) “0” or “1” ACK
Note: One byte of data consists of two ASCII codes. For example, 0x3A is “3” (0 x 33)
and “A” (0 x 41). <ACK> is 0 x 06. <NAK> is 0 x 15. <CR> is 0 x 0D.
Note: 1-byte data is represented in 2 ASCII characters, e.g. 0x3A is “3A” or 0x3341.
<CR> = 0x0DCommand or response terminator
<ACK> = 0x06Command accepted
<NAK> = 0x15Command not accepted
RS Command: RR<CR>
RS Return: RR + “16 bytes” + <CR>