JAI TM-9730CL, Руководство пользователя, Страница: 10 / 54

TM/TMC/RM/RMC-9730CL
2 Hardware Introduction
Note: The Kodak KAI -0373 imager used in the TM-9730CL is packaged using a clear coverglass that
does not have anti-reflective (AR) coatings. This is because the imager is not available from
the manufacturer, Kodak, with AR coating on the coverglass.
The camera will function normally and provide high quality imaging without AR coating.
However, in low light applications that are either high magnification or wide field-of-view,
reflections between the back of the optics and the coverglass may occur. In low light
conditions, portions of these reflections may cause some visible aberrations or ghosting.
•
Electronic shutter
The TM-9730CL has a substrate drain-type shutter mechanism which provides superb pictures at
various speeds without smearing. A built-in manual shutter speed control selects the electronic
shutter rate of 1/30, 1/60, 1/125, 1/250, 1/1,000, 1/2,100, 1/4,500, 1/10,500, or 1/31,500 second.
•
Output
The TM-9730CL has an 8-bit Camera Link digital output for interfacing with external image
processing systems. The optional analog output is 1.0 Vp-p composite video (75
Ω ).
•
Warranty
The CCD solid-state image sensor allows the camera to maintain a superior performance level
indefinitely while requiring virtually no maintenance. Please contact your factory representative for
details about the warranty.
Warning:
Unscrewing the camera cover or opening the camera in any way will void the warranty
unless prior written approval is obtained from the factory.
1.3 System Configuration
Figure 1 below presents a typical system configuration for the TM-9730CL camera.
Figure 1. TM-9730CL System Configuration.