TM/TMC/RM/RMC-9730CL
4
Installation
2.2.2
Connector Pin Configurations
2.2.2 (a) 12-Pin Connector
The TM-9730CL has a 12-pin Hirose connector for power input and signal integration. Pin #1 is
Ground and pin #2 is +12V DC. The pinout table is shown below. For the TM-9730CL, serial
communication camera control is done by means of the MDR26 Camera Link connector on the rear
panel of the camera
Table 1
Hirose power and signal integration.
Pin Description
Pin
Description
1 GND
(power) 7
VD in
2 +12V
DC
8
Reserved
3 GND
(analog) 9
HD in
4 Video
out
10
RXD (RS-232)*
5 GND
(digital) 11
NC
6 Reserved
12
TXD (RS-232)*
OP25-3 – RS-232 on 12-pin
2.2.2 (b) Camera Link Connector
The TM-9730CL has a 26-pin connector on the rear panel to output Camera Link data. The connector
pin-out is shown in Table 2 below.
Figure 2.
The 26-pin connector.
Содержание TM-9730CL
