JAI TM-9730CL, Руководство пользователя

Страница: 42 / 54

TM/TMC/RM/RMC-9730CL
34 Software Introduction
Figure 34. Graphical Knee Selections
7.3.5 (c) Table
The A and B designations access two different memory locations for loading knees from a table.
7.3.5 (d) X1, X2, Y1, Y2
The X and Y controls left of the graphical knee control allow LUT configuration by entering numbers
instead of dragging on the graphical control. This is useful when the desired LUT settings are known.
Use the Send Knees button to implement settings.
Figure 35. Sending Knee Settings
7.3.6 EEPROM Settings
The EEPROM settings can be accessed, restored, and saved using the main menu. The current page
(Current) or a setting stored in memory (Page) can be accessed by clicking the appropriate radio
button, selecting the page number, and then choosing the button for the desired functionality.
The Report button provides all of the saved or current information, depending on the setting. Load
makes a stored configuration the active configuration. Write creates a new setting; if a setting