JAI IIT Camera Systems VIS-CAM 350, Руководство по установке

Страница: 22 / 44

IIT Camera System Manual
22 Installation
Figure 12. IIT I/O Board Power and Data Connector X2 signals
Table 1 Electrical Connections for the IIT Camera X2 connector
X2 Pin # Wire Color Signal Remarks
1 White/Orange in Cat5E/6 cable Ethernet A+
2 Orange in Cat5E/6 Cable Ethernet A-
3 White/Green in Cat5E/6 Cable Ethernet B+
4 Green in Cat5E/6 Cable Ethernet B-
5 White/Blue in Cat5E/6 Cable Ethernet C+ Not Used
6 Brown in Cat5E/6 Cable Ethernet C- Not Used
7 White/Brown in Cat5E/6 Cable Ethernet D+ Not Used
8 Brown in Cat5E/6 Cable Ethernet D- Not Used
9 Black (
IN RED
/
BLACK PAIR
) GND
10 Red (
IN RED
/
BLACK PAIR
) +24V DC
11 Pink (
IN PINK
/
BLACK PAIR
) Trigger Out+ Balanced Trigger Pulse Output
12 Black (
IN PINK
/
BLACK PAIR
) Trigger Out - Balanced Trigger Pulse Output
13 Brown (
IN BROWN
/
BLACK PAIR
) LS RS485+ Serial Trigger Command Output
14 Black (
IN BROWN
/
BLACK PAIR
) LS RS485+ Serial Trigger Command Output
15 Orange (
IN ORANGE
/
BLACK PAIR
) No Connection
16 White (
IN ORANGE
/
BLACK PAIR
) No Connection
3.3 Connection to J-Panel and Power Supply
For connection to J-Panel please refer to VIS-CAM System Installation manual section 3.3.