JAI GOX-2402M-USB, Руководство пользователя

Страница: 61 / 84

Setting range Default value Description
Configure image capture settings.
0:SingleFrame
1:MultiFrame
2:Continuous 2:Continuous Select the image capture mode.
ー ー Start image capture.
ー ー Stop image capture.
1〜65535 1 In [MultiFrame] mode, set the number of frames to capture.
0.125〜 Set the frame rate as a frequency. (unit: Hz)
The maximum value varies depending on the PixelFormat and ROI settings.
0:AcquisitionStart
1:AcquisitionEnd
3:FrameStart
4:AcquisitionTransferStart 0:AcquisitionStart Select the trigger operation.
TriggerMode Off, On Off Select the trigger mode.
TriggerSoftware Execute a software trigger.
TriggerSource 0: Low
1: High
2: Software
10: PulseGenerator0
14-17: UserOutput0-3
21: Line5 Opt In1
26: Nand0 Out
27: Nand1 Out ー Select the trigger signal source.
TriggerActivation 1:Rising Edge,
2:Falling Edge,
3:Level High,
4:Level Low 1:RisingEdge Select the polarity of the trigger signal (i.e., location of signal at which trigger
is applied).
TriggerOverlap 0:Off, 1:ReadOut ー Select the trigger overlap operation.
TriggerOverlap[AcquisitionStart] = Off (Fixed)
TriggerOverlap[AcquisitionEnd] = Off (Fixed)
TriggerOverlap[FrameStart] = ReadOut (Fixed)
TriggerOverlap[AcquisitionTransferStart] = Off (Fixed)
TriggerDelay (us) 0〜500000 0 Set the time of exposure start from trigger input. (unit: μs)
0:Off
1:Timed
2:TriggerWidth 0:Off Select the exposure mode.
1μs 〜 ー Set the exposure time. The specifiable range varies depending on the
[StartTriggerMode] and [PixelFormat] setting.
0:Off
1:Once
2:Continuous Off Set whether to enable auto exposure.
0:Off
1:RCT Off Set whether to enable RCT mode.
e) AcquisitionControl
Item
ExposureModeOption
TriggerSelector
AcquisitionFrameCount
AcquisitionStop
AcquisitionStart
AcquisitionMode
ExposureAuto
AcquisitionFrameRate(Hz)
ExposureTime (us)
ExposureMode
— 61 —
Go-X Series USB3 Vision I/F