JAI GOX-2402M-USB, Руководство пользователя

Страница: 65 / 84

Setting range Default value Description
Configure Auto Level Control settings.
0: Peak Channel,
1: Selected Channel 1: Selected Channel
0:Red,
1:Green,
2:Blue 1: Green
30〜95 50 Set the target level for ALC. (unit: %)
― Low Right Select the area for which to configure [ALCAreaEnable].
[Setting range]
0:Low Right, 1:Low Mid-Right, 2:Low Mid-Left, 3:Low Left
4:Mid-Low Right, 5:Mid-Low Mid-Right, 6:Mid-Low Mid-Left, 7:Mid-Low Left
8:Mid-High Right, 9:Mid-High Mid-Right, 10:Mid-High Mid-Left, 11:Mid-High Left
12:High Right, 13:High Mid-Right, 14:High Mid-Left, 15:High Left
ALCAreaEnable True, False True Enable/disable the photometry area selected in [ALCAreaSelector].
True, False True True: Operate ALC with all areas designated as photometry areas, regardless of the
individual enabled/disabled photometry area states configured in [ALCAreaSelector].
False: Operate ALC according to the individual enabled/disabled photometry area states
configured in [ALCAreaSelector].
1〜100 90 Set the response speed. (100 is the fastest.)
100 〜 100 Set the minimum value for the ExposureAuto(ASC) control range.
― ー Set the maximum value for the ExposureAuto(ASC) control range.
100 〜 100 Set the minimum value for the GainAuto(ASC) control range.
〜 12600 12600 Set the maximum value for the GainAuto(ASC) control range.
0: Off,
2: ASC,
3: AGC 0:Off Allows confirmation of the current operation area during ALC operation.
― Idle Allows confirmation of the AGC, ASC, and AWB convergence status.
[Status]
1:ExecutingASC, 2:ExecutingAGC, 3:ExecutingASCandAGC, 4:ExecutingAWB
5:ExecutingASCandAWB, 6:ExecutingAGCandAWB, 7:ExecutingASCandAGCandAWB,
8:Convergent, 9:ConditionError, 255:Idle
Configure settings for other JAI functions.
Off, On Off Enable/disable VideoProcessBypass mode.
Configure shading correction settings.
0:Flat Shading
1:Color Shading 0:Flat Shading Select the shading correction method.
0:Off, 2:User1
3:User2, 4:User3 0:Off Set the area to which to save shading correction data.
When this is set to [Off], shading correction data is not saved.
ー ー Execute shading correction.
This command can not be executed under the following conditions.
・When no image is output
・Outputting TestPattern
・In Sequencer mode
・When the ROI setting is under the following conditions
(Width or Height is less than 128)
・In Decimation mode
・In Binning mode
ー ー Display the shading correction results.
[results]
0: Condition Error, 1: TooDark, 2: TooBright, 3: Correction Limit, 4: Complete
AutoControlStatus
j) AutoLevelControl
l) ShadingConrol
ALCControlReference
ALCControlChannel
VideoProcessBypassMode
ShadingDetectResult
PerformShadingCalibration
ShadingMode
ShadingCorrectionMode
Item
AutoGainControlGainRawMin
AutoShutterControlExposureMax
AutoShutterControlExposureMin
ALCAreaEnableAll
ALCControlRatio
AutoGainControlGainRawMax
ALCStatus
ALCAreaSelector
ALCReference
k) ImagingControl
— 65 —
Go-X Series USB3 Vision I/F