JAI GOX-2402M-USB, Руководство пользователя

Страница: 18 / 84

— 18 —
Step 5: Changing the Camera Settings
This section explains how to change settings by describing the procedure for changing the
output format as an example.
Configuring the Output Format
Configure the size, position, and pixel format of the images to be acquired.
The factory settings are as follows. Change the settings as necessary.
Factory default values (GOX-3201C-USB)
Item Default value
ImageFormatControl
Width 2048
Height 1536
OffsetX (horizontal position) 0
OffsetY (vertical position) 0
PixelFormat BayerRG8
* You can specify the image acquisition area. For details, see “ROI (Regional Scanning Function)”.
1
Configuring the [Width] of ［ ImageFormatControl ］
By selecting the item of [Width], you can change the value as shown below.
Note
Depending on the setting item, you need to change visibility.
Please switch visibility (Beginner / Expert / Guru) as necessary.
Go-X Series USB3 Vision I/F
DeviceControl
DeviceVendorName JAI Corporation
DeviceModelName GOX-3201C-USB
DeviceManufactureInfo See the possibilities
DeviceVersion XXXXX
DeviceFirmwareVersion XXXXX
DeviceSerialNumber XXXXX
DeviceUserID JAI_DEMO
DeviceTemperature XXXXX
DeviceReset ー
ImageFormatControl
SensorWidth 2048
SensorHeight 1536
WidthMax 2048
HeightMax 1536
Width 2048
Height 1536
Offset X 0
Offset Y 0
ReverseX False
ReverseY False
PixelFormat BayerRG8
Test Pattern Off
Acquisition Control
Acquisition Continuous
×
Device Control
Beginner Visibility