User Manual (Ver. 2.0) - Preparation
GO-5000M-PMCL | GO-5000M-PMCL-EP | GO-5000M-PMCL-UV
- 23 -
Step 4: Change the Camera Settings
Related Setting Items:
This section explains how to change settings by describing the procedure for changing the output
format as an example.
Configure the Output Format
Configure the size, position, and pixel format of the images to be acquired. The factory settings are as
follows. Change the settings as necessary.
Factory Default Values
Item
Default Value
ImageFormatControl
Width
2560
Height
2048
OffsetX (horizontal position)
0
OffsetY (vertical position)
0
PixelFormat
Mono8
You can specify the image acquisition area. For details, see “
ROI (Region of Interest) Settings
”.
Example: Change the Width setting (ImageFormatControl)
1. To check the current Width setting, enter the command
WTC?<CR><LF>
from the terminal
emulator software.
2. To change the Width setting to 2480, enter
WTC=2480<CR><LF>
.
3. To change other setting items, please use the Short ASCII command below.
Item
Short ASCII
Command
Values
Width
WTC
8 ~ 2560, 8 pixels / step
Height
HTL
1 ~ 2048, 1 line / step
OffsetX
OFC
0 ~ 2552, 8 pixels / step
OffsetY
OFL
0 ~ 2047, 1 line / step
PixelFormat
BA
0: Mono8, 1: Mono10, 2: Mono12