User Manual (Ver. 2.0) - Appendix
GO-5000M-PMCL | GO-5000M-PMCL-EP | GO-5000M-PMCL-UV
- 122 -
Appendix
Precautions
l
Personnel not trained in dealing with similar electronic devices should not service this camera.
l
The camera contains components sensitive to electrostatic discharge. The handling of these
devices should follow the requirements of electrostatic sensitive components.
l
Do not attempt to disassemble this camera.
l
Do not expose this camera to rain or moisture.
l
Do not face this camera towards the sun, extreme bright light or light reflecting objects.
l
When this camera is not in use, put the supplied lens cap on the lens mount.
l
Handle this camera with the maximum care.
l
Operate this camera only from the type of power source indicated on the camera.
l
Power off the camera during any modification such as changes of jumper and switch setting.
Caution When Mounting the Camera
When you mount the camera on your system, please make sure to use screws of the recommended
length described in the following drawing. Longer screws may cause serious damage to the PCB
inside the camera.
If you mount the tripod mounting plate, please use the provided screws.