User Manual (Ver. 1.0) - Main Functions
GO-5000M-PMCL-1 | GO-5000M-PMCL-EP-1 | GO-5000M-PMCL-UV-1
- 91 -
LUT (Lookup Table)
Related Setting Items:
This function can be used to convert the input to the desired output characteristics. The Lookup Table
(LUT) has 32 points for setup on this camera. The output level is created by applying gain to the input
level to achieve the specified output level.
LUT Mode
Can be set to OFF, gamma, or Lookup Table. If Lookup Table is selected, the dark compression is
forced to be OFF.
LUT Index
This represents the “starting” or “input” pixel value to be modified by the Lookup Table. This camera
has a 32-point Lookup Table. Thus, on this camera, an index value of 0 represents a full black pixel
and a value of 31 represents a full white pixel. The index point values are automatically scaled to fit the
internal pixel format of the camera. This is common for all output configurations.
LUT Value
This is the "adjusted" or "output" pixel value for a given LUT index. It has a range of 0 to 4095 (12 bits)
and is automatically scaled to the bit depth of the current output mode (8-bit, 10-bit, or 12-bit). Linear
interpolation is used to calculate LUT values between index points.
Note:
*The LUT must have a positive slope, i.e., the value for each index must be greater than the
previous index. If the value for an index is set ≤ one or more previous indexes, those indexes will
be automatically adjusted to maintain a positive slope.