User Manual (Ver. 1.0) - Main Functions
GO-5000M-PMCL-1 | GO-5000M-PMCL-EP-1 | GO-5000M-PMCL-UV-1
- 75 -
ExposureTime
This command is effective only when Exposure Mode is set to Timed. It is for setting exposure time.
The setting step for exposure time is 1 μsec per step.
l
Minimum
: 10 μsec
l
Maximum
: 8 seconds
Note:
Noise may make image unusable after 1 second.
ExposureAuto
This is a function to control the exposure automatically. It is effective only for Timed. JAI ALC
Reference controls the brightness. There are two modes, OFF and Continuous.
l
OFF
: No exposure control
l
Continuous
: Exposure continues to be adjusted automatically
In this mode, the following settings are available.
l
ALC Speed
: Rate of adjustment can be set
a.
ASC Max
: The maximum value for the exposure time to be controlled can be set.
b.
ASC Min
: The minimum value for the exposure time to be controlled can be set.
c.
ALC Reference
: The reference level of the exposure control can be set
d.
ALC Channel Area
: This can Enable or Disable the area selected by ALC Custom Area
Selector
ALC Area Type