27
INSTALLATION MANUAL
SPA WILL TURN OFF AFTER COOL DOWN
CYCLE
When the system is in Spa Mode (water is circulating
to the spa) and the Spa button is pressed to switch
water circulation to the pool, the system will not switch
to Pool Mode for five (5) minutes, and will continue to
circulate the water (if the heater has fired and has been
off for less than five minutes). This delay allows water
to cool the heater down by circulating water through it,
preventing equipment damage.
TIMEOUT MODE
TIME OUT mode is used by the pool service person
to aid them in servicing the pool. The JAUTPS/JAUTP
user interface will not be functional for three (3) hours,
or until the switch at the Controller is turned back to
AUTO mode. The time remaining for TIME OUT mode
is displayed on the user interface screen.
SPILLOVER DISABLED WHILE SPA IS ON
This message is displayed when the spa spillover is
pressed while in spa mode (water circulation is to spa).
The spillover requires that water circulation is to pool
in order to operate. The spillover will activate when the
system switches back to pool mode.
