13
INSTALLATION MANUAL
Filter Pump
NEW SCHEDULE
ON: 12:00AM
OFF: 12:00PM
DAYS: OFF
Filter Pump
NEW SCHEDULE
ON: 10:30AM
OFF: 7:45PM
DAYS: Weekday
SAVE
Filter Pump
NEW SCHEDULE
ON: 12:00AM
OFF: 12:00PM
DAYS: OFF
Filter Pump
NEW SCHEDULE
ON: 10:30AM
OFF: 7:45PM
DAYS: Weekday
SAVE
6.
Scroll down to SAVE. Press Select.
6.4
TEST THE JAUTPS/JAUTP
Perform a basic installation test to make sure the
controller turns on the filter pump, the pool heater,
and spa pump and spa heater (if applicable). Test the
controller installation using the Manual Control menu
to turn specific equipment ON/OFF manually.
6.4.1
TEST FILTER PUMP ON/OFF
MAiN > DeViCeS > FiLTer PuMP
Zodiac
12:40PM
Pool Mode
On
Pool Heater
80°F
Spa Mode
>
Spa Heater
>
Aux1
Off
Aux2
Off
Settings
>
Devices
>
Devices
Filter Pump
Off
Spa Pump
Off
Pool Heat
Off
Spa Heat
Off
Solar Heat
Off
12:40PM
Pool Mode
On
Pool Heater 80°F
Spa Mode
Off
Spa Heater
Off
Settings >
Devices >
Service Mode
>
Devices
Filter Pump
On
Spa Pump
Off
Pool Heat
Off
Spa heat
Off
Solar Heat
Off
More
•
Highlight FILTER PUMP and press Select to turn the
filter pump ON.
After a couple of minutes, you should hear the filter pump go
on.
6.4.2
TEST SPA PUMP ON/OFF
(IF APPLICABLE)
MAiN > DeViCeS > SPA PuMP
12:40PM
Pool Mode
On
Pool Heater 80°F
Spa Mode
Off
Spa Heater
Off
Settings >
Devices >
Service Mode
>
Devices
Filter Pump
Off
Spa Pump
On
Pool Heat
Off
Spa heat
Off
Solar Heat
Off
More
12:40PM
Pool Mode
On
Pool Heater 80°F
Spa Mode
Off
Spa Heater
Off
Settings >
Devices >
Service Mode
>
Devices
Filter Pump
Off
Spa Pump
On
Pool Heat
Off
Spa heat
Off
Solar Heat
Off
More
•
Highlight SPA PUMP and press Select to turn the
spa pump ON.
After a couple of minutes, you should hear the spa pump go
on.
6.4.3
TEST POOL HEATER ON/OFF
MAiN > DeViCeS > POOL HeATer
Devices
Filter Pump
Off
Spa
Off
Pool Heat
Off
Spa Heat
Off
Solar Heat
Off
More
Pool Heat
Enabled
Set to: 80°F
Devices
Filter Pump
Off
Spa
Off
Pool Heat
Off
Spa Heat
Off
Solar Heat
Off
More
Pool Heat
Enabled
Set to: 80°F
1.
Highlight POOL HEATER and press Select.
2.
Scroll up/down to set temperature then press Select.
After a couple of minutes, you should hear the pool
heater go on.
6.4.4
TEST SPA HEATER ON/OFF
(IF APPLICABLE)
NOTE:
To test the spa heater installation, first turn on
the auxiliary JVA associated with the spa (see
Section 7.10 Assign JVA
) and wait 35 seconds be-
fore turning on the spa heater through the UI.
MAiN > DeViCeS > SPA HeATer
12:40PM
Pool Mode
On
Pool Heater 80°F
Spa Mode
Off
Spa Heater
Off
AUX1 >
AUX2 >
Settings >
Devices >
Devices
Filter Pump
Off
Spa Pump
Off
Pool Heat
Off
Spa Heat
On
Solar Heat
Off
More
Manual Control
Filter Pump
Off
Spa
Off
Pool Heat
Off
Spa Heat
Off
Solar Heat
Off
More
Spa Heat
Enabled
Set to: 102°F
1.
Highlight SPA HEATER and press Select.
2.
Scroll up/down to set temperature then press Select.
After a couple of minutes, you should hear the spa
heater go on.
