![background image](http://html2.mh-extra.com/html/jacuzzi/j-touch/j-touch_use-and-maintenance_3197676031.webp)
31
P
atented original well-being. The timeless Jacuzzi® hy-
dromassage technology uses adjustable jets, used in all
directions, which massage, stimulate and tone the entire
body extending to the legs right to the bottom of feet. Pro-
gressively gaining intensity, in a central direction, and which
involves all muscle parts, unwinding, energising and ulti-
mately relaxing the body.
Q
Fill the tub, turn on the main switch and hold down the key displayed until the function
keys come on
(the battery charge level is briefly presented).
1
2
1
2
1
2
1
2
1
2
Q
Keep the “
pump1
” (or “
pump2
” ) key held down to activate the respective pump.
With models equipped with two pumps, the pumps can be activated individually or
simultaneously; it is also possible to exclude one
(but not both)
by holding down the rel-
ative key.
1
2
pump 1
1
2
pump 2
AQS mod.
Q
It is possible to use just one or both pumps: keep the key of the pump you wish to ad-
just held down and repeatedly press the “-” or “+” keys
(once adjustments have been made,
the pump-key LED light will light up and briefly flash)
.
In the instance where just one pump is active, adjustment may be completed without
pressing the relative key beforehand.
1
2
1
2
programme
activation
varying the
hydromassage intensity
If the remote control
fails to activate or
where the smallest
LED light flashes
, the battery must be
charged (refer to the Chapter.
"Charg-
ing the J.touch remote control"
)
Once on, the J.touch remote control,
where not used, switches off after
about 15 seconds; to turn it on again,
lightly shake it
The pumps are activated at pre-set in-
tensity levels; these can be adjusted, a
few seconds after switching on as de-
scribed below
You must wait a few seconds before
the pump starts, until the initial check
procedures are completed
It is possible to adjust the intensity ac-
cording to five levels, divided as follows:
Classic
hydromassage
0 - 1
2 - 3
4 - 5