![background image](http://html2.mh-extra.com/html/jacuzzi/j-touch/j-touch_use-and-maintenance_3197676038.webp)
38
The sanitization process cannot be in-
terrupted unless the power is discon-
nected via the main switch
It is not possible to activate the hydro-
massage during sanitization
Sanitization
W
e recommend the
J-MX 07
liquid, offered by Jacuzzi and available at the Assistance
Centres/Authorised Retailers, is used to clean the tub hydraulic circuit.
Q
It is possible to carry out this cleaning operation using the same water used for the
hydromassage provided that soap, oils, cosmetics,have not been used; otherwise, empty
the tub and fill it once again.
In any case, the tub water level (
free of concentrates
) must cover the nozzles on the
backrest.
Q
Check that the outlet nozzles along the tub perimeter are open.
Where not already completed, pour the J-MX 07 liquid sanitiser into the tank.
J-MX 07
Q
Hold down the key displayed until it becomes righter and the other keys turn off: the
pump will activate (
for approximately a minute
) to evenly distribute the liquid inside the
hydraulic circuit.
10 min
The function lasts approximately 10 minutes and is completely automatic; about one
minute before the end of the function, the pump activates once again to rinse the pipes.
When the key begins to flash, the function is considered complete: open the drain and
empty the tub.
It is essential to drain the water used for sanitization, the liquid can irritate the skin.
preliminary
operations
activate
the function