![background image](http://html2.mh-extra.com/html/jacuzzi/j-touch/j-touch_use-and-maintenance_3197676033.webp)
33
Aquasystem®
(AQS)
S
imply press the J.touch remote control keys to select from
the four different hydromassage programmes available:
- Silence
;
- Breath
;
- Dream
;
- Renew
;
Naturally, each programme is personalised to satisfy tastes.
Q
Fill the tub, turn on the main switch and hold down the key displayed until the function keys
come on (the battery charge level is briefly presented).
1
2
1
2
1
2
1
2
1
2
Q
Hold down the key controlling the pump start-up: after a few seconds, the function will
begin (the
"
silence
"
programme will be activated).
With models equipped with two pumps, the pumps are activated simultaneously;
(it is
also possible to exclude one
-
but not both - by holding down the relative key).
1
2
1
2
To select a different programme than the one offered, press, in sequence, the "AQS" key
(
you must wait a few seconds before the new programme begins).
1
2
1
3
4
Renew
2
Dream
Breath
Silence
programme
activation
selecting
the programmes
If the remote control
fails to activate or
where the smallest
LED light flashes
, the battery must be
charged (refer to the Chapter.
"Charg-
ing the J.touch remote control"
)
Once on, the J.touch remote control,
where not used, switches off after
about 15 seconds; to turn it on again,
lightly shake it
The pump(s) is activated at maximum
intensity; after a few seconds, it will
assume the characteristic value of the
programme selected
With models equipped with two
pumps, the programme is the same
for both
You must wait a few seconds before
the pump starts, until the initial check
procedures are completed