Jacuzzi Cloud 100, Лист предварительной установки

Страница: 6 / 34

6
n
Nel caso l’impianto elettrico dell’immobile non sia
in grado di assicurare un’alimentazione costante, si
consiglia d’installare uno stabilizzatore di tensione
prima dell’apparecchiatura, opportunamente di-
mensionato per la potenza della stessa.
■
I box doccia Cloud sono provvisti di un morsetto contraddisti-
no dal simbolo , situato sul retro del telaio, per il collegamen-
to equipotenziale delle masse metalliche circostanti (norme EN
60335.2.105).
■
L’apparecchiatura è provvista di sistema d’illuminazione con-
forme alle norme EN 62471:2009, gruppo di classificazione
lampade: esente.
Non osservare direttamente con strumenti ottici (binocoli,
fotocamere, lenti d’ingrandimento).
m
ATTENZIONE! Scollegare l’apparecchiatura dalla linea
di alimentazione elettrica prima di effettuare qualsia-
si intervento di manutenzione.
En
AS SOON AS YOU RECEIVE THE PRODUCT, CHECK THAT IT
IS IN PERFECT CONDITION AND,IF NOT, IMMEDIATELY NO-
TIFY THE FORWARDING AGENT.
Info
■
Cloud shower enclosures must not be installed outside and/
or in recesses; they must only be installed in corners.
■
Models without wall-mounted glass panel require attach-
ment of the roof to the wall within the area denoted by "A"
(refer to the technical specifications for individual models).
■
Cloud shower enclosures may be installed on the actual tray
(optional); however the flooring must be excavated for the par-
tial integration of the drainage column
(the instructions provided
with the technical specifications refer to the Cloud tray) .
n
ATTENTION: in order to install Cloud to its own tray, the
aforementioned must be installed to "a finished wall"
and NOT "under tile".
n
Place cement mortar (or similar material) between the
tray base and the flooring, in order to create a good
support surface and avoid any bending owing to the
weight of the user.
■
In the instance of installation without tray, an area (flat, level
and free from obstacles) on which to position the shower unit is
required
(see figure) .
Additionally, the drain must be placed near to the outlined
area
(see figure) ; with the aim of establishing a further obstacle
to prevent water leakages, we recommend to recess the drain-
age area and ensure the correct slope.
For dimensions, refer to the individual technical specifica-
tions for each model.
■
The installation area must comply with the following charac-
teristics:
- Walls: straight and level.
- Flooring and walls: tiled or laid, without skirting boards
and/or projections.
Drain preparations and water connections
■
We recommend arranging the shower enclosure drainage as
demonstrated in positions 1 or 1a (refer to the individual techni-
cal specifications for each model).
NOTE FOR MODELS WITHOUT TRAY
In the instance of these models, the boiler drain is connected
to an opening at the lower section of the shower enclosure
panel so that the water falls onto the tray and into the drain.
Alternatively, it is possible to directly connect the boiler
drain to a siphon (not supplied) equipped with rubber holder.