Jacobsen 63281, Техническое руководство

Страница: 11 / 84

CONTROLS 5
11
E. Choke Lever - The choke lever opens and closes
the choke valve in the carburetor. The CLOSED
position enriches the fuel mixture for starting a cold
engine. The OPEN position provides the correct fuel
mixture for operation after starting, and for restarting
a warm engine.
F. Fuel Valve Lever - The fuel valve opens and closes
the connection between the fuel tank and the
carburetor. The fuel valve lever must be in the ON
position for the engine to run. When the engine is
not in use, leave the fuel valve lever in the OFF
position to prevent carburetor flooding and to reduce
the possibility of fuel leakage.
Note: Before tipping mower back for adjustments,
the fuel lever must be moved to the OFF position to
prevent fuel from leaking into the crankcase.
G. Traction Clutch Lever - Point lever forward (G
2
) to
disengage traction drive and allow drum to “free-
wheel”. Point lever to the back (G
1
) to engage.
H. Reel Clutch Lever - Point lever up (H
1
) to engage
the reel drive mechanism. Point lever down (H
2
) to
disengage the reel.
J. E-Stop - Used to stop the engine. Push switch
down to disable engine ignition, pull up for normal
operation.
Figure 5C
Figure 5D
WARNING
To prevent bodily injury or property damage,
never engage the reel or traction clutch levers
while the engine is running or the O.P.C. bail is
engaged.
DANGER
Keep hands and feet away from the cutting unit to
prevent serious cuts.
!
!
ON
OFF
E
F
G
H
G
1
G
2
H
1
H
2