Jacobsen 63281 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 84

background image

8 MAINTENANCE

24

8.3

ENGINE OIL ______________________________________________________________

Check the engine oil at the start of each day, before starting
the engine. If the oil level is low, remove oil filler cap and add
oil as required.

Perform initial oil change after the first 20 hours of operation.
Change oil every 100 hours thereafter.

See the engine manufacturer’s Owners’s Manual for
detailed service information.

After adding or changing oil, start and run engine at idle with
all drives disengaged for 30 seconds. Shut engine off. Wait
30 seconds and check oil level. Add oil to bring up to FULL
mark on dipstick.

Use only SAE 10W30 engine oils with API classification
SG.SF/CC.CD

Figure 8A

8.4

FUEL ____________________________________________________________________

Handle fuel with care - it is highly flammable. Use an
approved container, the spout must fit inside the fuel filler
neck. Avoid using cans and funnels to transfer fuel.

• Store fuel according to local, state or federal

ordinances and recommendations from your fuel
supplier.

• Never overfill or allow the tank to become empty.

• Use clean, fresh, regular grade, unleaded gasoline

minimum 86 Octane.

• See engine manual before using oxygenated (blended)

fuel.

• Do not fill above the fuel filler neck.

Upper Oil Level

Oil Filler Cap

WARNING

Never remove the fuel cap from the fuel tank, or add
fuel, when the engine is running or while the engine is
hot.

Do not smoke when handling fuel. Never fill or drain
the fuel tank indoors.

Do not spill fuel and clean spilled fuel immediately.

Never handle or store fuel containers near an open
flame or any device that may create sparks and ignite
the fuel or fuel vapors.

Be sure to reinstall and tighten fuel cap securely.

!

«
...
22
23
24
25
26
...
»

Содержание 63281





















































































Отзывы:

Нет отзывов

Похожие инструкции для 63281

Бренд: Walker Страницы: 100

Бренд: Nakayama Страницы: 65

Agco Allis 1692173

Бренд: Simplicity Страницы: 60

67971 - LF 3400

Бренд: Jacobsen Страницы: 122

Бренд: Wards Garden Mark Страницы: 16

Бренд: Poulan Pro Страницы: 48

Бренд: Toro Страницы: 28

Бренд: Toro Страницы: 52

Бренд: Yardworks Страницы: 27

Бренд: Ozito Страницы: 8

Flex Cut RMR 230 H

Бренд: Wiedenmann Страницы: 55

Бренд: S.E.P. Страницы: 20

Бренд: Cramer Страницы: 216

Бренд: Craftsman Страницы: 20

Бренд: Okay Страницы: 36

Бренд: Simplicity Страницы: 30

Бренд: Exmark Страницы: 60

Бренд: Kellfri Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды