background image

1    SAFETY

4

1

   SAFETY 

1.1   OPERATING SAFETY ______________________________________________________

1.

Safety is dependent upon the awareness, concern
and prudence of those who operate or service the
equipment. Never allow minors to operate any
equipment.

2.

It is your responsibility to read this manual and all
publications associated with this equipment (Engine
manual, accessories and attachments). If the
operator can not read English it is the owner’s
responsibility to explain the material contained in
this manual to them.

3.

Learn the proper use of the machine, the location
and purpose of all the controls before you operate
the equipment. Working with unfamiliar equipment
can lead to accidents.

4.

Never allow anyone to operate or service the
machine or its attachments without proper training
and instructions; or while under the influence of
alcohol or drugs.

5.

Wear all the necessary protective clothing and
personal safety devices to protect your head, eyes,
ears hands and feet. Long hair, loose clothing or
jewelry may get tangled in moving parts. Operate
the machine only in daylight or in good artificial light.

6.

Evaluate the terrain to determine what accessories
and attachments are needed to properly and safely
perform the job. Only use accessories and
attachments approved by Jacobsen.

7.

Stay alert for holes in the terrain and other hidden
hazards.

8.

Inspect the area where the equipment will be used.
Pick up all the debris you can find before operating.
Beware of overhead obstructions (low tree limbs,
electrical wires, etc.) and also underground
obstacles (sprinklers, pipes, tree roots, etc.) Enter a
new area cautiously. Stay alert for hidden hazards.

9.

Do not carry passengers. Keep bystanders and pets
a safe distance away.

10. Never direct discharge of material toward

bystanders, nor allow anyone near the machine
while in operation. The owner/operator can prevent
and is responsible for injuries inflicted to
themselves, to bystanders and damage to property.

11. Never operate equipment that is not in perfect

working order or is without decals, guards, shields,
discharge deflectors or other protective devices
securely fastened in place.

12. Never disconnect or bypass any switch.

13. Carbon monoxide in the exhaust fumes can be fatal

when inhaled. Never operate the engine without
proper ventilation.

14. Fuel is highly flammable, handle with care. See

Section 6.9 

15. Keep the engine clean. Allow the engine to cool and

always close fuel shut off valve and remove the
spark plug wire from the spark plug before storing.
Do not store unit near an open flame or flammable
debris.

16. Place unit on a flat surface, disengage all drives and

engage parking brake before starting the engine.

17. Local regulations may restrict the age of the

operator.

18. Operate the machine across the face of the slope

(horizontally), not up and down the slope (vertically).
Never operate on wet grass.

19. Always operate at speeds that allow you to have

complete control of the machine. Be sure of your
footing; keep a firm hold on the handle and walk;
never run.

20. Before you clean, adjust or repair this equipment,

stop the engine, disconnect the spark plug wire, and
keep the wire away from the plug to prevent
accidental starting.

This machine is to be operated and maintained as specified in this manual and is intended for the professional
maintenance of specialized turf grasses. It is not intended for use on rough terrain or long grasses.

 

WARNING

EQUIPMENT OPERATED IMPROPERLY OR BY UNTRAINED PERSONNEL CAN BE DANGEROUS. 

 Familiarize yourself with the location and proper use of all controls. Inexperienced operator’s should receive 

instruction from someone familiar with the equipment before being allowed to operate the machine.

!

Содержание 63281





















































































Отзывы: