Jacobsen 63281 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 84

background image

SAFETY 1

5

1.2

IMPORTANT SAFETY NOTES ________________________________________________

This safety alert symbol is used to alert you to potential hazards.

DANGER

- Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

WARNING

- Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious

injury.

CAUTION

- Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury

and property damage. It may also be used to alert against unsafe practices.

For pictorial clarity, some illustrations in this manual may show shields, guards or plates open or removed. Under no
circumstances should this equipment be operated without these devices securely fastened in place

By following all instructions in this manual, you will prolong the life of your machine and maintain its maximum
efficiency. Adjustments and maintenance should always be performed by a qualified technician.

If additional information or service is needed, contact your Authorized Jacobsen Dealer who is kept informed of the
latest methods to service this equipment and can provide prompt and efficient service. Use of other than original or
authorized Jacobsen parts and Accessories will void the warranty.

WARNING

The Operator Presence Control (OPC) on this machine will shut off the reel
and traction drive if the operator releases the OPC bail.

To protect the operator and others from injury, never operate equipment with
the OPC system disconnected or malfunctioning.

!

!

WARNING

1.

Before leaving the operator’s position for any reason:

a.

Disengage all drives.

b.

Engage parking brake.

c.

Stop engine.

2.

Keep hands, feet, and clothing away from moving parts. Wait for all
movement to stop before you clean, adjust or service the machine.

3.

Keep the area of operation clear of all bystanders and pets.

4.

Chock or block the wheels if the machine is left on an incline.

5.

Never operate mowing equipment without the discharge deflector
securely fastened in place.

!

«
...
3
4
5
6
7
...
»

Содержание 63281





















































































Отзывы:

Нет отзывов

Похожие инструкции для 63281

Бренд: MTD Страницы: 12

Бренд: McCulloch Страницы: 96

Бренд: Sears Страницы: 60

Бренд: Flymo Страницы: 11

Бренд: Snapper Страницы: 40

Бренд: Simplicity Страницы: 48

Бренд: Murray Страницы: 56

Бренд: Alamo Industrial Страницы: 186

Бренд: PROTEA Страницы: 15

Mini Mini 1,35 Z 079

Бренд: Talex Страницы: 41

Бренд: Poulan Pro Страницы: 48

Бренд: Nakayama Страницы: 80

PERFORMANCE 50562X89

Бренд: YARD KING Страницы: 60

Бренд: Cub Cadet Страницы: 24

PRO AT45026GENG

Бренд: Generac Power Systems Страницы: 28

Бренд: AVANT Страницы: 30

Бренд: Turfmatic Страницы: 22

Бренд: Sabo Страницы: 268

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды