Jackson Labs PHASE STATION 53100A Скачать руководство пользователя | Manualshive

Страница: 217 / 225

background image

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022

217

Performance Certification and Validation

Jackson Labs Technologies, Inc. certifies that this product met its published specifications at time of delivery. Because

measurements made by the PhaseStation 53100A Phase Noise Test Set are based on differences between the external signals

applied to the DUT and REFERENCE ports, no specific periodic calibration procedures are required. Furthermore, in the absence

of errors reported by the measurement software, no specific maintenance procedures are necessary, including preventative or

periodic maintenance.

The procedures outlined in the default mask definition file (

default_masks.txt

) will permit customer verification of all

specifications using commonly available test signals. Users requiring annual performance certification should contact

http://www.jackson-labs.com/index.php/support

for factory-certified performance verification options.

Warranty

This Jackson Labs Technologies, Inc. hardware product is warranted against defects in material and workmanship for a

period of 1 (one) year from date of delivery. During the warranty period Jackson Labs Technologies, Inc. will, at its

discretion, either repair or replace products that prove to be defective. Jackson Labs Technologies, Inc. does not warrant

that the operation for the software, firmware, or hardware shall be uninterrupted or error free even if the product is

operated within its specifications.
For warranty service, this product must be returned to Jackson Labs Technologies, Inc. or a service facility designated by

Jackson Labs Technologies, Inc. Customer shall prepay shipping charges (and shall pay all duties and taxes) for products

returned to Jackson Labs Technologies, Inc. for warranty service. Except for products returned to Customer from another

country, Jackson Labs Technologies, Inc. shall pay for return of products to Customer. If Jackson Labs Technologies, Inc. is

unable, within a reasonable time, to repair or replace any product to condition as warranted, the Customer shall be entitled

to a refund of the purchase price upon return of the product to Jackson Labs Technologies, Inc.

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by the

Customer, Customer-supplied software or interfacing, unauthorized modification or misuse, opening of the instruments

enclosure or removal of the instruments panels, operation outside of the environmental or electrical specifications for

the product, or improper site preparation and maintenance.

JACKSON LABS TECHNOLOGIES, INC. SPECIFICALLY

DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

.

No license,

express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Jackson

Labs Technologies, Inc. products are not intended for use in medical, life saving, or life sustaining applications.

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE THE CUSTOMER'S SOLE AND EXCLUSIVE REMEDIES. JACKSON LABS

TECHNOLOGIES, INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.

«
...
215
216
217
218
219
...
»

Содержание PHASE STATION 53100A


































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PHASE STATION 53100A

Бренд: Zetec Страницы: 23

Бренд: Tascam Страницы: 27

Бренд: Jay-Lor Страницы: 72

Бренд: MacDon Страницы: 198

Бренд: M-Triangel Страницы: 6

Бренд: Bante Instruments Страницы: 6

Бренд: e+p Elektrik Handels Страницы: 2

Бренд: Gaspardo Страницы: 196

Бренд: RAB Страницы: 2

Frontier FC5706

Бренд: OHAUS Страницы: 47

Бренд: Ocutech Страницы: 4

Бренд: EuroLite Страницы: 2

CHIEFTAIN E1006

Бренд: Falcon Страницы: 5

Бренд: Marani Страницы: 35

Aesculap S4 Cervical

Бренд: B. Braun Страницы: 43

Dynamique Biski

Бренд: Enabling Technologies Страницы: 44

Бренд: Car-Interface.com Страницы: 8

Бренд: Nahita Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды