Maintenance Manual for J2 Sedan
Mechanical Part of Engine
42
■
Before starting engine, check oil and fluid levels (including engine oil and coolant). Refill to
specified level as required..
■
Check for fuel leakage with following steps
：
-
With ignition switch turned to the “ON” position, check whether there is fuel leakage at the
connecting positions.
-
With engine started, recheck whether there is fuel leakage at the connecting positions during engine
increasing.
■
During running of engine, check for any abnormal noise and/or vibration.
■
With engine warmed up, verify that there are no leakage of fuel, exhaust gas or other oil and liquid
(including engine coolant and oil).
■
Bleed air and replenish by using specified ports and hoses.
■
After engine cooled down, recheck oil and liquid levels (including engine oil and coolant). If
necessary, refill them to the specified levels.
2) General of Check Items
List of Leakage Check Items
Item
Before Startup
During Engine
Operation
After Engine
Stopped
Engine coolant
Level
Leakage
Level
Engine oil
Level
Leakage
Level
Transmission oil, brake fluid, and clutch fluid
Level
Leakage
Level
Fuel
Leakage
Leakage
Leakage
Exhaust
—
Leakage
—
