Maintenance Manual for J2 Sedan
Service
25
6) Rear brake shoe
Check the brake shoe thickness and its contact
state with the brake drum. If it fails to meet the
requirement, replace.
■
Standard thickness of brake shoe (A): 5 mm
■
Allowable limiting thickness (A): 1 mm
12. Inspection of Steering Gear and Pull-rod
1) Steering gear
■
Check whether the steering gear housing and
dust boot are free from looseness, damage
and grease leakage.
■
Check whether its connection with the
steering column is loose.
2) Steering pull-rod
Check ball joint, dust boot and other components for loosening, worn, damage and grease leakage.
13. Check the pipeline.
Stop engine, check fluid level in reservior.
Attention:
■
Be sure not to fill steering fluid excessively.
■
Check for proper installation position of pipeline, and
any leakage, crack, damage, loose connection, worn
or ageing.
14. Axle and Suspension Components
Check for proper clearance between front/rear axles and suspension components and any crack,
damage, worn or other damages.
Fig. 2.2.020
Fig. 2.2.021
Fig. 2.2.022
Check the leakage of
lubricating grease
Check the tightening torque
