jablotron JA-60GSM, Руководство пользователя

Страница: 2 / 12

User manual JA-60GSM - 2 - MFJ51808
- 2 - MFJ51006
1. User features of the GSM dialer
The JA60GSM dialer offers many useful features described in detail below. The installer should
properly demonstrate the use of the system to the user after installation and instruct the user on how to
set user access codes.
1.1. Phone calls from the attached SMS-8010 telephone set (optional accessories)
After the GSM module is connected to the GSM network, an attached phone can be used. If you
pick up the phone you will hear a dial tone. Simply dial the number you want to call. You can also dial
the GSM communicator’s phone number from another phone and the attached phone will ring as a
normal landline phone would. If it is necessary to communicate with CMS the call from the attached
phone will be terminated in 10 minutes. If a busy tone is generated while the attached phone is being
used, it indicates either the line you are calling is busy or that the GSM communicator is busy with a
communication (alarm system data transfer has priority).
1.2. Sending SMS messages
If used, then the SMS-8010 phone can be used for easy and convenient receiving and sending of
SMS messages. The main features of SMS-8010 are:

Making calls
– using the receiver or the build-in hands-free set

Writing SMS messages using an alphabetical keypad, message archiving (40 messages)

Call record function
– caller identification and date/time

Integrated phonebook records up to 80 phone numbers and names
For detailed information see the SMS-8010 manual.
1.3. Telephone remote control of the alarm system
A Jablotron system equipped with the GSM dialer can be remotely controlled via a landline or mobile
phone. From a mobile phone there are two possibilities
– either by text instructions sent via SMS or by
dialing-in and operating the system via the phone keypad, which operates in the same way as the alarm
system keypad. The dialing-in method can also be preformed from an ordinary landline telephone.
The following description matches the factory default settings of the dialer. The described features can
be modified during the installation. The installer should explain clearly any changes to the default settings.
1.4. General instructions for the remote control via SMS instructions
 SMS instructions can be sent from a mobile phone or from Jablotron’s SMS website
(
www.GSMlink.cz ).

SMS messages are not case sensitive. Only Standard English letters are accepted.

All SMS instruction words must be separated by a space.

If the % is used all previous text will be ignored. The %% symbol when used in SMS text ends
processing
– all the following text will be ignored. It is recommended to use this symbol at the end of
the instruction if the provider sends some additional text after your message (advertisements etc.).

Warning: if any incoming SMS includes except a valid system command any extra text
which is not separated by % or %% symbols the command will not be executed
Examples of SMS:
“Hi, this text will be ignored even if I write ME % MO %% Thank you” –
Only MO
command will be executed
“Hi, MO” –
Command in the SMS will be ignored because there is an extra text

The default command texts can be customized by an installer or user (see section 3.3). E.g.
the command AUXON can be changed to SWITCH ON HEATING etc.
1.5. Arming by SMS (AM xxxx)
The command AM followed by a valid access code is used for arming the alarm system. If the
system is already fully armed, this command will be ignored.
Send SMS text to the dialer: AM

xxxx
xxxx is a valid alarm system access code (Master or user).

separator (asterisk or space)
Example: Sending of AM

1234 will arm the system in the same way as if the code 1234 is entered on
system’s keypad.