jablotron JA-60GSM, Руководство пользователя

Страница: 11 / 12

User manual JA-60GSM - 11 - MFJ51808
- 11 - MFJ51006
- 11 - MFJ51006
5. Web server remote access
5.1. Setting possibilities:
The setting server allows a user to read and change the control panel and dialer configuration. Data
transfer is made by sending an SMS. The web site allows the user to change:

control panel setting,

dialer setting,

set messages that will be transferred to up to 7 phone numbers,
The web site is able to read an event memory of a control panel as well (such as ComLink software). The
number of sent data SMS’s is optimized to reduce costs as much as possible.
5.2. Registration to the web site
Registration can be done in two ways:

Web site www.gsmlink.cz
– to register your system use the registration code printed on the
warranty certificate (the code has a form xxxxx-xxxxx-xxxx and it is unique for each system)

Mobile phone
– when the alarm system is in the programming mode, enter 972 xxxxx F0 on
the alarm system keypad (xxxxx is your mobile phone number). After a moment you will receive
an SMS with a registration code and the system will register to the web server.
5.3. Control panel or GSM dialer setting
If you want to set the control panel features you need to know your service and user code. After
receiving the correct SMS the GSM dialer will switch to the service mode (disarms and enters the
service mode), set the parameters, reads settings and switches back to the chosen mode (service,
armed or disarmed). Correct settings and state of the control panel is transferred back to the server.
5.4. Reading of history events
History events are readable in any state of the control panel (service code is not needed). One SMS
contains 20 events. If it is necessary to read all of the events the GSM dialer will send 7 SMS
messages.
6. The Modem function
The GSM communicator can also be used as an external modem for accessing the Internet (GPRS
format). It is necessary to have the GPRS in the SIM card activated and to have a connection cable
connected to the COM port of the PC. Support for MS Windows operating systems can be found on
the enclosed CD. The modem can be used only when all reports to the CMS, SMS and system’s calls
are executed.
When the modem is used:

It is possible to use the attached telephone, the internet connection will be temporally suspended

Received SMS’s are stored and they will be processed after disconnection of the modem

The modem will be disconnected if an alarm or arming event occurs
7. Additional information
7.1. Events reporting priorities:
If the dialer is activated to send an events report it will:

send information to CMS

send SMS reports (1st telephone number, 2nd telephone number,…. 8th tel. number)

send audible warnings (1st telephone number, 2nd telephone number,…. 8th tel. number) –
each number is called only once, no matter if it is answered or not
If any event is triggered which should be reported to a CMS while the alarm system is accessed remotely
from a phone, the report will be sent after the remote access is finished.
If the user cancels the alarm, all reports, which haven’t been sent yet, will be deleted. This doesn’t included
communication with the monitoring station.