jablotron JA-60GSM, Руководство пользователя

Страница: 10 / 12

User manual JA-60GSM - 10 - MFJ51808
- 10 - MFJ51006
- 10 - MFJ51006
The emergency number can be entered by:
99 xx...x F0
where:
xxx…x
is a telephone number (max. 20 digits), enter F9 before the number if you
need + prefix for international calls
4.6. Remote programming of the alarm via SMS
The command PRG is used for sending programming and operating commands to the alarm system.
It has the same effect as if the commands are entered on the alarm system keypad. Enter the following
command :
yyyyy

PRG

seq,seq,seq,
where:
yyyyy is the remote access code; factory default setting is 1111; this code can be changed,
see section 4.1
PRG is the command identification
seq are the programming or operating sequences, consisting of characters 0 to 9, F, N.
There can be more than one sequence in one SMS. The particular sequences must
be separated with a comma or period. The number of sequences in one SMS is only
limited by the maximum size of the SMS in the GSM network.

separator (asterisk or space)
Example: if the control panel is disarmed and its master code is 1234, then if you want to set user code #2
for the alarm system, use the following command SMS: 1111

PRG

F61234 02 6789
After receiving this command message, the new user code (6789) will be added into the control panel.
4.7. Prepaid SIM cards
The JA-60GSM communicator can send information about the credit of a prepaid SIM card. An SMS
sent from any of the stored numbers (sequence 7t...) containing the word CREDIT followed by the
correct instruction (different for every provider) will result in the sending of the information about the
credit. Please ask your mobile phone provider for more information.
If you want to check the credit regularly use the following sequence.
CREDIT uuu..u xx yyy zz
where:
uuu…u
is the instruction given by the provider for receiving information about the amount
of credit
xx is the time period (in days) for every checking.
yyy is minimum level of credit
zz is a position of the credit in the information SMS sent by the provider
If the level of the credit is lower tha
n set value (zz) the event “battery discharged GSM communicator”
will be sent to the preset telephone numbers. If the credit is restored the event “battery OK GSM
communicator” will be sent to the preset telephone numbers. To disable this function set the time (xx)
period to 00.
Note:

The user is responsible for the level of the credit

The producer does not recommend the use of prepaid cards .