![background image](http://html2.mh-extra.com/html/jabiru/2200/2200_installation-manual_3120942038.webp)
Jabiru Aircraft
Pty Ptd
Installation Manual
Jabiru 2200 Aircraft Engine
REVISION
0 1 2
Dated : March 2006
Page:
38
\\Gateway\library\files\engine_manuals\2200_engine_manuals\Hydraulic_Lifters\Working copies\HL_Installation_Manual_2200_Rev_0.doc
Print Date: 3/8/2006 1:56:00 PM
d) To place the nuts on the mount bolts the rubbers must be compressed. Do this by
using a deep reach socket inside the engine mount pins & clamping the rubber mount
assembly using a G-clamp with the swivel taken off the ball. See Photo. Start nuts on
both upper mount bolts.
e) Once bolts of the upper rubbers are started, continue lowering the front of the engine
& align the lower engine mount pins with the engine backing plate.
f) Use the weight of the engine to compress the lower rubbers & fit the nuts to the bolts.
Figure 15. Upper Engine Mount Detail
g) The lower engine mount rubbers are assembled in the same way, except the male
engine mount rubber is fitted to the engine mount pins first. Refer to drawing below.
h) Tighten nuts until firm. (Engine mount washer will touch the engine mount pin as the
rubbers compress)
Female engine
mount rubber
Engine
backing plate
Male engine
mount rubber
Engine mount Washer
Heat proof nut