![background image](http://html2.mh-extra.com/html/jabiru/2200/2200_installation-manual_3120942046.webp)
Jabiru Aircraft
Pty Ptd
Installation Manual
Jabiru 2200 Aircraft Engine
REVISION
0 1 2
Dated : March 2006
Page:
46
\\Gateway\library\files\engine_manuals\2200_engine_manuals\Hydraulic_Lifters\Working copies\HL_Installation_Manual_2200_Rev_0.doc
Print Date: 3/8/2006 1:56:00 PM
Figure 24. Typical Hot Air Mixer Box
Figure 25. Control Connections to Carburettor
p) Fit throttle cable to carburetor. Note that Jabiru Aircraft kits come with a throttle cable
cut to length and with the correct end fitting attached. Engines used in firewall-forward
kits will be supplied with a length of throttle cable with no end – the builder must cut
the cable to length and fit the carburettor end fitting. 5/16” washers are used on the
cable end fitting (one washer either side of cable end fitting) to align cable. Use R-clip
to assemble.
q) Fit choke cable to carburettor. Use an R-clip to assemble. Note that the fuel line from
the fuel pump to the carburettor passes between the choke and throttle cables. Choke
cable not shown on Figure above.
Jabiru Aircraft Throttle
cable connected
Kit Throttle Cable
Carburettor end
Throttle lever end