![background image](http://html2.mh-extra.com/html/jabiru/2200/2200_installation-manual_3120942016.webp)
Jabiru Aircraft
Pty Ptd
Installation Manual
Jabiru 2200 Aircraft Engine
REVISION
0 1 2
Dated : March 2006
Page:
16
\\Gateway\library\files\engine_manuals\2200_engine_manuals\Hydraulic_Lifters\Working copies\HL_Installation_Manual_2200_Rev_0.doc
Print Date: 3/8/2006 1:56:00 PM
spark plug on that cylinder. (Note that number 4 head runs hottest in normal tractor
installations.) Jabiru Part No. PI10732N is the recommended gauge.
9.1.4.1
Cylinder Head Temperature Wiring
Loom and sensor is supplied with the instrument. These must be installed as per directions.
If cable is too long it must be looped as many times as necessary and strapped behind the
instrument panel.
DO NOT CUT TO LENGTH
Ensure that wire is not chaffing on the fibreglass air duct or cooing fins.
No power connection is required.
9.1.4.2 CHT
Sender
Temperature of the cold junction for best results should be around 50ºC. Ensure cold
junction is furthest from the thermo couple probe as possible.
9.1.5
Exhaust Gas Temperature Gauge
An optional Exhaust Gas Temperature Gauge can be fitted. The probe should be positioned
100mm from the port flange on the exhaust pipe of a convenient cylinder. Jabiru Part No.
PI0325N is the recommended gauge.