![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_instruction-and-maintenance-manual_3119579023.webp)
Jabiru Aircraft
Pty Ltd
Instruction & Maintenance Manual
Jabiru 2200 Aircraft Engine
Hydraulic Valve Lifter Models
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
REVISION
0
1
2
3
4
5
6 7
8
9
Dated : June 2010
Issued By: DPS
Page: 23 of 116
L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx
Conduct the items shown under 25 Hour Check at above (include oil and filter
change)
5.6
100 Hours Check
Details of specific operations are shown in "Maintenance" section of this manual.
Conduct the items shown under 25 Hour Check (include oil and filter change)
Renew spark plugs.
5.7
TBO
Details of specific operations are shown in
“Maintenance" section of this manual.
Engine Overhaul, in accordance with Service Bulletins
Conduct the items shown under 25 Hour Check above.
Check clearance on throttle valve shaft. If radial clearance exceeds 0.5mm (0.020"),
repair carburettor.
The overhaul work must be carried out to Jabiru specifications at an approved
aeronautical service facility or by an approved Jabiru Service Centre.
If necessary, changes to the TBO Limit due to operational experience, will be
announced by Jabiru in a Service Bulletin.
5.8
Engine Preservation
The following procedures assume that the engine is installed in a Jabiru airframe. For
other aircraft types, refer to the manufacturer's service manual. If the engine is not fitted to
an airframe, ignore those items referring to the airframe.
Note:
Failure to store the engine for a long period period of time, in excess of 90 days,
without taking the preventative measures as outlined in the manual will affect claims upon
Jabiru’s Limited, Express Warranty.
5.8.1
Flyable Storage
Flyable storage is defined as a maximum of 30 days non-operational storage.
Ensure that the engine has been stopped by turning off the fuel valve, ensuring all fuel
is drained from the carburettor bowl.
Fit covers to engine induction air inlet and exhaust outlets to minimize moisture ingress
to cylinders.
Every 7th day the propeller should be rotated through 5 revolutions, without running
the engine. Leave the propeller in the horizontal position to ensure even distribution of