![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_instruction-and-maintenance-manual_3119579019.webp)
Jabiru Aircraft
Pty Ltd
Instruction & Maintenance Manual
Jabiru 2200 Aircraft Engine
Hydraulic Valve Lifter Models
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
REVISION
0
1
2
3
4
5
6 7
8
9
Dated : June 2010
Issued By: DPS
Page: 19 of 116
L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx
4.4
Take-Off
Climb with the engine at maximum continuous power. Observe Oil & Cylinder Head
Temperatures & Oil Pressure.
Limits must not be exceeded !
( Max. continuous RPM at Full Throttle is 3300 RPM ).
4.5
Engine Stop
In normal conditions, cooling down the engine during descent & taxiing will permit the
engine to be stopped by switching OFF the ignitions.
4.6
Engine Stop and Start During Flight
Reduce power to 2000 RPM to cool engine for 30 seconds, then to idle. Switch ignitions
OFF. Starting procedure is the same as ground starting, without choke for a warm engine
& with choke for a cold engine. Note: Engine cools quickly with propeller stopped in flight.
Choke will therefore normally be needed to restart.